OnePlus 8 3D Curved UV Full Adhesive 9H Tempered Glass Screen Protector By T MAX
Full adhesive UV Glass Screen Protector No Gaps, No Lifting, No Touch Errors, No Coloured Edge and Case friendly.
T-Max UV Glass Installation Guide:
Note: Must Follow Instructions below to have a Bubble-free installation. No replacement or refund on screen protector in case of bubbles.
Please refer to YouTube link as well https://youtu.be/NzYj4zT6aAk
Step 1. Clean your phone with alcohol cleaner and cleaning cloth
Step 2. Cover the phone Speaker and Earpiece with Masking Tape
Step 3. Use the Installation tray if provided to align your phone. Make sure that the phone is flat completely into the installation tray.
Step 4.Put the Orange bar of the tray to the middle groove. Remove the lid of the adhesive UV bottle and put the glue into the hole of the orange bar.
Step 5. Once the glue completely finish then take off the glue and push the orange bar to the top.
Step 6. Tear off the protective film, at the back of the glass protector and put the glass protector starting from the bottom
Step 7. Wait until the glue completely spread to all corners of the screen protector and if any part of glass protector is not covered by glue, you can tilt the phone so that glue can flow
Step 8. Use a turned-on UV Light to cure the screen for 15 sec each top, middle and bottom parts.
Step 9. Use alcohol bag to clean off the excess glue at the edges of the phone
Step 10. Remove all masking tape covering speaker and other connection holes
Step 11. Repeat the curing process by using the UV light, the top, middle and bottom three parts are each 2 minutes
Contents of Package:-
Tampered Glass, UV LED Lamp with USB Cable, Adhesive Bottle, Alcohol Cleaner, Cleaning Cloth, Dust Remover Sticker x 1 Unit